Liquidware Gadget Pack
From Calliespedia
Contents |
Manufacturer Information
Liquardware
Address
- 960 Turnpike Street, Unit 15
- Canton, MA 02021
Telephone Numbers
Main
+1-646-835-9728
Fax
+1-860-893-0234
Website
Owner's Manual
Purchase History
Purchased From
Liquidware Booth at Maker Faire
Purchase Date
May 23, 2010
Features
- TouchShield Slide
- Arduino Duemilanove
- DoubleWide ExtenderShield
- MeCap Lithium BackPack
- Compass Module
- 3-axis Accelerometer Module
Technical Details
TouchShield Slide
- 320×240 OLED Screen
- Resistive Touch Screen
- Holds 60 128×128 bitmap images
- Compatible with Arduino Environment
- Only Uses Arduino Pins: 3 and 4
- Graphics Library Ready to Go
- Draw Shapes, Pixels, Colors, Graphs, Buttons
- 2.83 inch diagonal
Arduino
- ATmega168
- 14 i/o pins
- 6 PWM
- 6 Analog
- 16MHz
DoubleWide ExtenderShield
- 4.2in tall x 2.7in wide
- 108mm tall x 69mm wide
- Arduino replicated mounting holes
- Arduino replicated plated through-holes
- Solderable dev area
MeCap Lithium Backpack
- Medium Capacity 1000mAh Lithium Ion Battery (15 Standby Arduino Hours)
- Rechargeable via Arduino USB
- Rechargeable via USB Tybe-B Mini Cable
- Supplies regulated 5V and 3.3V
- Monitor battery voltage status
Compass Module [1]
- HMC6352 chip
- 4-pin male header included
- 4-pin stack through header included
- Heading output (0-360 degrees)
- I2C 2-Wire Serial Interface
- 3 output modes: Standby, Query, and Continuous
- Heading accuracy: 2.5 degrees
- Heading resolution: 0.5 degrees
- Arduino pin compatible
- +5V Tolerant I/O
3-axis Accelerometer Module [2]
- Built-in 5V tolerance protection
- Selectable Sensitivity (1.5g/2g/4g/6g)
- Low Current Consumption: 500 μA
- Sleep Mode: 3 μA
- Low Voltage Operation: 2.2 V – 3.6 V
- High Sensitivity (800 mV/g @ 1.5g)
Programming Touchscreen Slide
- Remember to press the programming button the the touchscreen before uploading your program to the unit.